CARPology 3 Issue Subscription (Worldwide) From £14.25
Subscribe
Share
Share
Pin
Rigs
25 Oct 2017
by Mat Woods
Is a supple hooklink better?
When every man and his dog is using a stiff or semi-stiff hooklink, isn’t it time to reconsider supple materials? Avid Carper Mat Woods begs a worthwhile question…

Supple rigs. In a sea of coated braids, it’s quite rare to see an angler confidently casting a braided hooklink into the pond. And even then, it’s usually wrapped neatly inside a solid PVA bag.

There aren’t many anglers I fish with that choose braid as a first choice hooklink material. There aren’t many I know at all that go for supple rigs first, either. The name that really springs to mind is Simon Crow, who has been using the same simple line-aligner rig with soft braid for longer than even he remembers. Crowy is one of the best anglers I’ve ever met and he probably reads my rig features and thinks ‘what are you on about Woodsy!’ He’s a great case-in-point of how anglers make certain presentations work for them and has a big fish record most Northerners could only dream of.

Add some stiffness - Try stiffening up the section immediately behind the hook with a Rig Kicker.
Stabilise the hook - A Rig Drop Sinker helps stabilise the last inch or so for better hookholds, more often.
Make it difficult - A blowback set-up makes it difficult for a carp to deal with a supple rig once pricked.

Braid works, but the question is, why does it work and how can we stack these benefits in our favour? I think most anglers avoid braid through a fear of tangles, which is understandable, but when there are so many easy ways to avoid tangles, it seems nonsensical to ignore the material altogether. Quite recently I had a great summer at Linear Fisheries using the braided rigs I usually use for solid bagging on standard lead clips. In fact, I find results to be better without the bag! Also, on RH Fisheries’ Weston Park, I had some big hits of summer carp using a simple snowman rig on a supple hooklink. In fact, at the time I was using a prototype material subsequently brought out as the Avid Carp Pindown. This is a lead-free material made from heavy PTFE fibres which makes it super supple, super heavy and really strong. It’s great as a leader and the 20lb version is a brilliant hooklink.

My rig was embarrassingly simple. A curved hook with a rig ring on the shank, tied Knotless Knot style. The more bait I put in, the shorter the rig got. It wasn’t any more or less complicated than that!

The Kenny Dorset or ‘KD’ rig is a flawed idea, in my experience

As the season wore on, I did find the odd carp coming astray during the fight. The Weston fish have really soft mouths so it was something most anglers suffered, but I wasn’t happy to accept it! Instead, I looked to improve the arrangement somehow. Braid’s benefits are truly related to the freedom and flexibility of the material. It tends to lay in coils, rather than ‘kicking away from the lead’ – which is in itself a misnomer but that’s another article (again) for another day – but these coils mean your rig always has a lot of lateral movement and ‘travel’ when your bait is picked up by a carp.

It also lays over most lakebeds really naturally. No sitting up off the bottom – it all lays down really nicely.

Stabilise your set-up by extending the hook shank

After this, you are relying on the end inch to do the work for you. With no stiffness from the hooklink end, there is no ‘point of no return’. You are 100% dependent on what happens to your hook inside the carp’s mouth.

Now one way to ensure effectiveness is a long Hair. The Kenny Dorset (KD) rig is okay for this, but I’ve found it to be the fastest and easiest way to hook and lose a carp. I know others who love it, but for me, I’d rather tie a dog turd on the end. The long Hair works okay with a Knotless Knot, but the hook is too free to fold over and simply fall from a carp’s mouth. It needs something to stabilize it.

Silicone around the bend works with a heavy hookbait for this reason

Many anglers when using bottom baits put the Hair around the bend using silicone tubing, which works really nicely I think. The theory is the weight of the bait keeps the hook hanging ‘prone’ and whilst a boilie underwater isn’t necessarily that heavy, it does seem to work quite well.

The alternative, of course, is to add some form of line-aligner, a length of tubing, or a pre-formed Rig Kicker. Note that Crowy’s favoured set-up uses a line-aligner to neaten everything up and help the hook find a hold. It’s worth paying attention to this, as mentioned earlier, his results are pretty damn good!

Braid always follows the contours. It’s an edge on some lakebeds

I quite like just extending the curve of my favoured Avid CRV hooks. I use either the full Rig Kicker or a trimmed down version depending on the size of the hook and bait being used, but by just adding some stiffness behind the hook, I feel like my supple rig is working for me, rather than against me.

I’m a bit of a freak of nature in that I find it very hard to tangle anything. I have great results casting out braided rigs without a PVA bag, nugget or stringer, but if you are paranoid about this, all of the aforementioned help, but not as much as hitting a line clip or simply using your finger to ‘brake’ the line before it enters the water. ‘Feathering’ the lead down I’ve found to increase tangles. You buffering the line as the lead slows down just causes everything to wrap around itself – it’s not the one!

A Weston winter lump caught using a soft hooklink
Also Recommended
9 forgotten methods of carp fishing
05/03/2017
Features
9 forgotten methods of carp fishing
We reveals all those old methods that worked in the past but have now been forgotten because something more “fashionable” has come along
05/03/2017
Features
Shotting out your hooklink
15/11/2016
Rigs
Shotting out your hooklink
How to get your hooklink to fall perfectly every time
15/11/2016
Rigs
Why you should use mono hooklinks
02/11/2016
Rigs
Why you should use mono hooklinks
Avid Carp’s Brand Manager, Mat Woods looks back at an 80’s classic: the mono hooklink, revealing some must-knows and new 21st century tweaks and tricks
02/11/2016
Rigs
How to decide what lead set-up to use...
21/09/2017
Rigs
How to decide what lead set-up to use...
We ask Elliott Gray...
21/09/2017
Rigs
Gardner Trick Link
21/11/2016
Reviews
Gardner Trick Link
Cheap, strong, reliable.
21/11/2016
Reviews
Avid Trap Line
10/11/2016
Reviews
Avid Trap Line
Half time! With summer behind us, it’s time for your six-month re-spool, but this time you’ll get change from a tenner…
10/11/2016
Reviews
How to make the last 12-inches even better
04/07/2017
Rigs
How to make the last 12-inches even better
Who would've thought the last 12-inches would be such a shite? So here's seven bite-sized bits of advice
04/07/2017
Rigs
Avid Carp Pindown and Captive ranges
26/08/2016
Reviews
Avid Carp Pindown and Captive ranges
Avid’s Pindown and Captive collections...
26/08/2016
Reviews
Spotted Fin hooklink materials
15/08/2016
Reviews
Spotted Fin hooklink materials
Spotted Fin made sure they covered all the bases with this new collection of hooklink materials: the finish, the braid, the coating, the stiffness, the workability – all nailed!
15/08/2016
Reviews
How to stop putty coming off
17/07/2017
Rigs
How to stop putty coming off
Follow our simple steps and you will never have trouble with the sticky stuff again
17/07/2017
Rigs
How to stop your hooklinks twisting
03/07/2017
Rigs
How to stop your hooklinks twisting
Big fish angler Mark Bryant answers your top rig-related questions and this time focuses on twisting hooklinks
03/07/2017
Rigs
Should your line float or sink when floater fishing?
22/05/2017
Features
Should your line float or sink when floater fishing?
These are the little tweaks that can make the difference between getting a bite in the first place and then actually contacting with it when you strike
22/05/2017
Features