Who invented what?
A bit of carping history...
Ever wondered who dreamt up some of clever gadgetry which you use on every angling trip? The Baitrunner facility on your Shimano’s? That remote-controlled bait boat which you use to deliver your finely-tuned KD Rig tight to the far bank? And what about PVA, leadcore, oval brollies with sides - the list goes on and on. Well, here’s some of the answers…
1. Lead clip
It was Kevin Nash who released the first safety lead clip in 1992.
Our very own Keith Sykes brought this to the attention of fellow Longfield anglers in 1987, even though he’d been playing with 45lb Kerplunk for a number of years.
3. The ‘Best Ever Rig’
The Hair, brainchild of Lenny Middleton and Kevin Maddocks, became public knowledge in the early 80s.
4. Specialist carp hooks
Richard Walker designed the very first specialist carp hook in 1947, which was made by S.Allcock & Co in Redditch. This was later to become the ‘Dick Walker Carp Hook’ which was sold by Bruce and Walker.
5. Landing net
One of the very first fibreglass landing nets was made by Dons of Edmonton and was called The Springbow. It was released in 1975 and cost the princely sum of £21.00 plus the mesh!
6. Commercially available fluoros
Between them, Dynamite Baits and Frank Warwick made the first commercially available fluoro pop-ups.
7. Famous carp hook
Jack Hilton famous carp hook based on his solder-blobbed version was made by Partridge of Redditch and sold by Alan Brown of Hitchin in 1979.
8. Teflon coating
Partridge of Redditch were one of the very first companies to use teflon as a coating, and they produced the famous Ritchie Macdonald bent hook in the early 90s.
9. Carp reels
Abu of Sweden were the first company to bring a suitable reel for carp angling in the form of the Cardinal 66 and 77 (in the mid-60s) that had a rear drag and also a folding handle and even a folding bail arm. This was later superseded by the Cardinal 55 and 57 which launched in 1978/79 and cost £35.50.
10. Rod revolution
1982 saw Rod Hutchinson launch the revolutionary 12ft LR Spiraflex Carbon Carp Rod: the benchmark for future carp rods and was designed in conjunction with Alan Brown. Rod also designed a 9ft stalking rod and a 5’8” jungle stick. Later he trialled his Beastmaster: a 15ft carbon rod designed to combat the line cut-offs on the bars in Savay and Harefield.
11. Oval brolly
In 1987/88, that mastermind that goes by the name of Kevin Nash designed the first 60” oval brolly.
12. Bait boat
CARPology’s Pete Regan is credited for creating the first fully working remote controlled bait boat.
13. The Titan
A few years later, that man Kevin Nash did it again by designing the first Titan bivvy which hit the shops in 1992.
14. Brolly sides
In the early 80s Clive Dietrich and Malcom Winkworth designed the Water Lot: probably the first brolly side panels for a 45” Wavelock brolly! These were sold by Lloyd Bent at The Carp Cellar in Watford.
15. Rod pod
Richard Gardner of Gardner Tackle was the first company to produce a commercial rod pod in 1986.
16. Coated hooklink
Kryston’s Dave Chilton brought us the first coated hooklink material in 1995 which he called Snake-Skin.
17. Carp group
The Carp Society was formed in 1981 by Tim Paisley.
Mass baits were set to hit the scene in 1974, as all the Redmire syndicate were on them now after Rod Hutchinson’s success.
19. Buzzer bars
Gardner Tackle launched the first buzzer bars in a lovely cult black colour in 1980.
20. Carp vids
The first carp fishing videos showing tackle methods etc. were released by Richworth (Streamselect) Baits in the early 1980s. The same company who brought us ready-made boilies.
Rick Gardner had his design head on when he made rolling baits so much easier with the introduction of the Rolaball, which later grew into a range of sizes. The first were introduced in 1984.
22. Stainless steel
Martin Locke of Solar Tackle brought us readily available stainless steel products in the late 80s including adjustable buzzer bars.
23. Sleeping bags attached to bedchairs
Nash Tackle launched the unique Indulgence Bedchair Sleep System in 2008, doing away with sleeping bags as we know them.
24. Adjustable legs
In 1982, a chap by the name of Cliff Fox (you may recognise the surname…) filed a patent on an adjustable-legged bedchair.
25. Funnel Web System
You have Fox’s Chris Rose and Steve Spurgeon to thank for that.
26. Bits and pieces
Monkey climbers, backleads, rig bins, stringer needles, nut and boilie drills, Spin Doctor - and the real big one, PVA string - were all products thought up by Gardner Tackle’s company owner, Rick Gardner.
27. No Loss Thumbscrews
Jag Products saw an end to you losing the thumbscrews on your banksticks and buzz bars thanks to their unique No Loss Thumbscrew which they released in the October of 2009.
28. Ready to go
In 1994, the Hooker Holdall from Kevin Nash was the first rod holdall to take fully made up rods.
29. The Baitrunner
The late Jan Porter came up with the name ‘Baitrunner’ for the free-spool facility on Shimano’s reels.
30. The KD Rig
That will be Essex-based angler, Kenny Dorsett. And whilst many think the Multi Rig was Jon Mac’s creation, it was actually Essex rig guru Mike Kavanagh’s idea.
31. Flotation sling
This now most-copied product was the brainchild of tackle designer, Jon ‘Shoes’ Jones.
32. Dissolving foam
Thank Solar’s Martin Locke for this stuff.