CC Moore
Gemini
Yeti
Corus NEW
CARPology Reviews
Image

Wychwood Maximiser Rods

Wychwood’s new range of rods is designed to help you send your bait further than those around you

Wychwood have released a number of new rods for 2019, and part of that lineup includes the Maximiser, which does as its name suggests and wrings out every last ounce of your casting ability. There are just two rods in the Maximiser stable, but they are quite different tools designed to fit specific needs.

The Big Five

1. Pick the right one for you
Both Maximiser rods have a 3.5lb test curve, but they are separated by nine-inches in length and different properties. The 12-footer is a beefy caster, but still has enough cushioning to be an enjoyable playing rod that can absorb fish lunges in the margins. The 12ft 9in version is a more specialised casting tool, designed to help you cast as far as you can.

2. The differences
The longer rod has a stepped-up butt section for much more power, and a super-fast-taper tip section to help the blank recover in an instant. The result is not only extreme casting potential, but also increased casting accuracy.

3. The similarities
Both Maximisers are built with a 1k carbon weave on an ultra-high-modulus, low-resin blank. They have 50mm butt rings, anti-frap tip rings and 18mm Fuji reel seats. Understated black graphics and a slim duplon handle complete the package.

4. Why Wychwood
Wychwood have been making carp rods for many years, producing some absolute classics along the way. With a team of consultants including big-chucker Nick Helleur, the Maximisers have been thoroughly tested and developed.

5. The choice
Both rods are designed for long-range angling, so don’t instantly dismiss the 12-footer as a weaker option. It’ll still cast a solid PVA bag over 100yds. The extra length of the 12ft 9in version might have more power, but you’ll need to be able to access it by being capable of compressing a longer rod. The 12ft version retails for £199.99 and the 12ft 9” is £219.99.

Casting tips: Power in the cast is generated from your front arm pulling down like a piston, not from your rear arm pushing forwards. Concentrate on getting that front arm high, then pulling it fast towards your hip. The rear arm must follow suit, but it’s there to help with accuracy, making sure your cast is straight and true.